Why is Infrared Thermal Imaging Great for Your First Home?

When you are buying your first home, try taking the help of all the possible technologies to make the purchase a success. Infrared thermal imaging is one such technology that homeowners can utilize entirely. These cameras can spot the tiniest temperature changes in various parts of the house. This is how the problematic areas are easily identified which was previously impossible to the naked eye. A house will normally show up as hot or cold or somewhere in between and you can take the necessary actions accordingly. Here is why it is a must today.

What does infrared imaging reveal?

Moisture is the biggest issue that comes in the way of your dream house. Through thermal infrared imaging, you will get to detect every source of moisture, dampness, moulds, roof leaks, and termite nests. Electrical problems are also detected easily. The problems of heat and energy loss, cracks in the foundation, missing insulation, the problem with ventilation or structural concerns can be assessed easily.

Roofing leaks

Water has a high thermal capacity and hence it will give up its heat slower than the roofing materials would do. So, with thermal imaging, it is possible to identify the areas that have accumulated moisture in them. To get better results, it is ideal to check it during the evening when the surrounding temperature starts to fall. The roofing materials will give up the heat, showing purple areas in the image. The moisture-bearing areas will still be warm and orange.

Electrical faults

When getting into a new house, you also need to thoroughly check the electrical wirings. You need to know the source of electrical problems quickly and accurately and this will add immense value to your home. In this way, you can easily prevent property damage or injuries. The thermal images will have yellow marks wherever any faulty electrical system is detected. Once spotted, it will be easier to get repaired.

Structural defects

When the walls, floors or ceilings are scanned, differences in the temperature are noticed. This is due to the difference in heat conductivity. With the help of the imaging, one would get a clear idea of the structural components that are missing and what portions of these are damaged. Besides the missing insulation, there can be chances of wet basement walls. Detecting these can prevent the chances of mould formation.

The Inspection batiment et thermographe certifié MCM is the right solution for your home inspections. 

Leave a Reply

Your email address will not be published.